Extreme burner avr windows 10 download.Installation


Looking for:

OZ2M – Next Generation Beacons – Atmel alternative programmer.Download extreme burner windows 10 for free

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
May 29,  · eXtreme Burner – AVR, Free Download by eXtreme Electronics. We do not have a download file for the latest version (), but you can try downloading it . Jul 24,  · eXtreme Burner AVR comes comes with a single installer that will easily install the device driver and the application for burning hex files to MCUs. Please note that their is NO need to install device driver separately, the installer will do everything. You can find this setup file on the DVD that is supplied in the package. May 10,  · Download. Download eXtreme Burner – AVR v for Microsoft® Windows® XP®, Vista®, 7 (both 32 and 64 bit versions). This version has the drivers built into the installer. Linux Version ; Linux Version for Ubuntu (New).
 
 

Extreme burner avr windows 10 download.Extreme burn avr

 

We would be very thankful to you. These OS does not allow installation of unsigned drivers. Please see the following video on how to disable this. Only after disabling this feature install the software.

This is first public release so please send your suggestions and bug reports. Peoples interested in translating the app may get more information on this page. Facing problem with your embedded, electronics or robotics project? We are here to help! Post a help request. Avinash Gupta is solely focused on free and high quality tutorial to make learning embedded system fun! More Posts – Website. Follow Me:. Hi Avinash! It is very use ful for me thanks regards s. Best regards, Ian.

Mostly waiting for the linux version.!!! Hi Avinash, Thank you for this really nice and good software. He did not have success with Vista in his notebook. Is there a way to install it under Vista?

Something like a special driver? Best Regards, Ailson. Also one of my customer will it check under Vista. We will do something to run it under Vista.

Very nice SWm and working very good. One question: It is a little bit to slow. How can I make it faster. Hi, is it possible to pass hex file through command line?

I saw that eXtreme Burner automatically recognizes mcu type and if file could be opened with command line option it would be great. An even better feature would be a way to list the differences often marked by an internal date stamp. That said, V1. Thanks again for a major advance in AVR programming! I will surly apply the improvements that you have suggested.

As this was the very first version so it was not that advanced. Or suitable firmware and hardware for Extream-burner software. Thanks in advance. Great job on the program. Does it verify the entire memory or just the written one? Hi Kunal, If the Mega8 is not fried, one relatively easy way to recover it is to build a Dontronics DT parallel port SPI programmer very easy to build, even in a protoboard, with just a couple or Ohms resistors and a cap.

As you have messed up with the fuses, it is very important that you use an external clock source tied to XTAL1 pin. You can nake one with a timer. Setup as the programmer DT Setup carefully the fuse bits to fit your needs. Hope I have helped, and good luck Ailson. I can test it for you. Also I would love to see it go open source. I m using ur gui software for burning my avrs… n its being wrking gr8!

Based on libusb-windevice-bin Thanks for good project. Please read my feedback. Slow reading maybe it seems so for me only? I will implement the following in next release. Much more faster! I thank that normal position is connected and simply soldered it to ground. It appears with all software programmers. Very thanks and respect! Sifun, AVR beginner. I think this timeout 5sec caused by autodetection process.

How to disable it…. In windows vista you cant write the calibration fuses and maybe its a tip to make da delay between writing and verifying cause my m16 gives errors with full sck but with slow sck is works perfect. Looks very nice. Will try it out as soon as my programmer arrives. Fuse settings are a bit sparse… could have a drop down table as per AVR Studio.

Very good software! Will you develop multilingual version? If so, then I can help with the translation program for Russian and Ukrainian languages. Many thanks for your Offer to help!! Yes I have plans for multilingual version. I will contact you soon for translation help. I relied on the two 68 Ohms resistors to protect the USB lines, dropping the microcontroller port voltage from 5V to around 3.

Once I included them, Vista immediately recognized the driver and eXtreme Burner worked beautifully. Regards, Ailson. Extreme Burner is a great alternative for avrdude gui. Many thanks for You Avinash. I have only one suggestion: it could be a little bit faster for coding I use AVR Studio , now the time of writing the flash is 1 minute…. Stoping verification would be a bad move…Do you really not have a few seconds to spare in your life to wait for the messages?

I fine great your software…. If you want I can help to translate your software to spanish language South America need something like this!! I have made one exactly as you describe and it works perfectly. Mismatch at location 0x, task failed. This problem is very reproducable: ive tried this with several attinies, all of them fail this way. Have anyone had the same problem?

Is this a connection problem, a problem with the programmer, or the extremeburner? Hi it is great but when i use it for ATMEGA and the program was very large the software failed to load the hex file.

Martin, Avinash Here, I thank you a lot for helping Vikram for his pointless question. But I have to delete these comments as they are not relavant to the page. Hi again, Ive tested it on an Atmega8 and it works flawless. I think my problem with partial writing of the hex code on attiny13s is because i use attiny13 and the program only supports attiny13A. Tiny 13A should work ok…. They both have the same signature bytes… 1E 90 Thank you. Will expansion of the list of the list of the supported microcircuits?

I detailed this information here for your knowledge so you can safely include in the next release , and for all users. All the needed information can be found in the respective datasheet. If it works fine, the user might wish to post here to let you and the users to know. Windows users: As an advice, it is more convenient to right-click the chips. Best regards and a fruitful , Ailson. Error message: Mismatch between the program and library build versions detected. The library used 2. There are probably problems with Python wxLibs on Ubuntu.

Hi Atul, Please, tell us what Operating System you are using. If you can, tell which USB driver version you installed 0. Did you build your oun USBAsp programmer? If so, can you post the link to the page you got the schematic from? Does your programmer have the two protecting 3. I had the same problem as yours just because I did not solder those diodes Windows Vista. When you installed the driver, you did it as Administrator?

Waiting for your response, Regards, Ailson. SIR when I connectthe USB cable my pc says that the usb device is not recognized and i have tried all the methods of updating the driver and even i have formatted my pc foe that. SIR, when i am installing the driver of version 0. Firstly, there are no caps on the crystal….. To speed-up things, if you have a voltmeter around, measure the Zener voltage from a removed device or use one of the same type, if you bought extras with a Ohms resistor and a 5V supply.

It should be around 3. This is because as one is usually not sure which Zener diode he got especially the ones glass-encapsulated , there is a possibility that the zener voltage rating is not the correct one.

Hi, Martin. Based on your name, you might be from a developed, first world, country. Best regards. Sir i want to ask that why we have to connect the caps across the X-TAL? Atul You are quite correct sir, I forget there are less fortunate ppl in this world. Pingback: Programy obs? I am using SuseLinux While starting. Fatal Error: Mismatch between the program and library build versions detected. Fedora 12 — install wxPython 2. Open Suse 11 — eXtreme Burner 1. Normal user can do nothing.

Next burning I set the configuration bits. SBasp detected but cant communicate with the target chip. Hi dragos, Look at my post 89 above. Just copy and paste the whole entry for the Atiny24 chip just bellow it in the chips.

Make a back-up of the XML file, just in case. Too many people asking for the most basic of help. The best help forum and a wealth of historic information is avrfreaks. Dhananjay I used that its working and it can programme 3 to 4 times after that there is a problem with programmed IC. If you ifnd that problem then please contact me. When i try to run this software under OpenSuSe WxGTK, Wxwidgets is installed. Libusb too i work with this library on another project.

Maybe we can persuade the owner to compile this with a static wxwindow library. So will probably work on all linux versions. How about a fuse settings like in BascomAVR, where is more clearly, it can be made? Hellow Avinash, You did a great job! I like the tool very much. AVR v1.

Thanks for the bug report And details. They can help be correct the bug. Thanks again for the help. Re bug in hex address: Careful here! In fact Intel Hex format is limited to bit addressing. So for addresses above 0x , the segment address is 0x i. Thus the command line in the hex file is: 02 02 EC without the spaces.

It also saves an. Do you consider compiling a 64bit Linux version? I am getting the. Error, and thats mostly because I have not the 32bit wxGTK libs installed. I only suggest to put a button or a shortcut on the toolbar to write the flash eeprom fuses only. I know there is a menu command to do it, but after many cycles of programming only one of these i wished there were a faster way.

Hi Avinash, U r really doing gr8 job. I want to program ATmegap. Can u plz giv some suggestions regarding this. Thanx in advance. Anyways great job! Hi, great software, thank you!!! If there is possibility to improve fuses settings like in Khazama it will be perfect! When will the support of the ATMega P be available? Hi, I am a complete newby to programming AVR microprocessors.

Forgive me if I ask a stupid question. Am I correct? Are there any pitfalls in this approach? Thanks Avinash, I really appreciate you taking the time to respond to my question. Remember at the bottom of the list you will find beginners tutorial while as you go up, you will find more advanced one!

I spoke about it before. When you think it can be done? Could you include a Alphanumerical view for the Hexfiles like in Ponyprog on the right side? You can safely update the next version of this brilliant software with this controller. I would like to know if Extreme Burner supports Attiny Can anything be done about it? I have about 10 chips that I would like to program via usb and I already have the usbasp. Works great with atmega8 but would like to test it for tiny There is a way to manually edit the chips.

It requires the device signatures of the chip available from datasheet u want to be added. Cheers… Allah Hafiz. Thanks suleman. But can anyone tell me what might be the problem. I have just purchased 10 of each and they are new. I am using the Usbasp and extreme burner. Can anyone please help me. There might be a couple of problems:. Chk out your programming connector configuration. Well, I have checked the voltage supplied. It is 5V, from the programmer. It does not work even for my Atmega I have heard a little bit bout factory settings.

So, any suggestions on what to do? Use a different clock speed? Or take out the clock altogether? I really do hope it works. I doubt that all the chips I purchased are faulty as I have gt them from a reliable supplier. Anyway, it works for my Atmega8. Please help me. PS: The factory settings of attiny45 and dont require reset to be pulled up or to provide external oscillator.

Try tht anyway.. I did put a 10k pull-up resistor. Are there any other possible ways to fix it? I tried to write an atmega8 chip, the usbasp worked ok. I also tried khazama use same usbasp and attiny13A, it also worked.

We are building an Installer with built in drivers signed! But you have to wait as I have lots of other work to do. Thanks for the nice and easy product. I have tried deleting the libusb0.

Thanks very much for it. One question, do you know any programmer to write code for ATmega8. John Contact me at sulemanzmail gmail. I may be of help regarding the hardware issues atmega8L n caps u r facing cz i have spent quite a bit of time debugging em… Cheers. Hai shreyas.. Hi avinash why cant you add 89S series microcontroller in this software.

Please have a look on it. Hi, seems that there is existing serious trouble regarding the install procedure in the Linux. I use Ubuntu Please let us to know what exact installable package. I know the problem exists. I will recompile it under Ubuntu Currently it works under Fedora only. It is a very serious security problem to have to run a program as root and there is a fairly simple way to work around that on systems that run udev kernel 2.

The file contains:. If multiple devices are plugged in then each will get a unique link e. I hope you find this helpful. I have compiled it specifically for Ubuntu So it should run with out frills on latest Ubuntu release. This should call up the editor and the file shown should be empty. Add the following to the file shown:. Save the file, exit the editor and close the terminal window. Now plug in one of your USB flash drives if external USB hard disk, you must unplug it and then plug it back in for the rule to affect it.

Regarding post not working for you.. Also, the udev file that I described in my post only contains 2 lines with the second one being optional but the post broke the second line over two lines so it might mistakenly look like 3 lines. You might want to check that if 9. You might also want to check the udev man page to make sure the custom rules. Regarding post Also, FYI, root has access to everything so you should never need to add root to a special group e.

Something that I forgot to mention on my initial post is that when making this kind of udev group customization, you should make certain that the group you specify is actually a valid group on your system usbusers is not a valid group in Hi, Avinash!

Ubuntu Any advice? It does not support ATmega P chip. So there is no way to program this chip with ex burner?? Pingback: MyEtec » Blog Archive. I am using Ubuntu Check cables. I am using a development board from protostack. The claim is that eXtreme Burner works with Linux too. Remove the bogus information from the Internet. It someone would like to inform the significance of the line, I would be gratefull.

I have looked through data sheets for all other parts listed and cannot find the appropriate values. I work with Debian and I did following: 1. Downloaded libwxgtk2. And free for reseller if i make the hardware and sell it with this software? Yes this software is free, even for resellers who wish to bundle it with their hardware. For for resellers it is advised to get a re-branded software. For cost of re-branding please send and email. Hi all, I have been using this excellent programming software for almost a year, with Atmega on prototyping board and hardware programmer from Protostak.

This combination works flawlessly and I have written many AVR assembler programs and downloaded them with exterme burner software. All works beautifully. I wish to upgrade to Atmega stamp from Futurlec. Are there any known issues with Extreme burner and the chip? Do I need to change any parameters? Thanks in anticipation of reply. I think I cannot access memory above the 64K Address. If you encounter any other issue please inform so that I can correct. OK, will do!

It will be several weeks before I get to progarm the but I will let you know either way. So please guide or make a tutorial on interfacing a mcu through usb. Hope you get me. Hi there. I was trying to install extreme burner on Ubuntu Does anybody know how to fix it?

Please send me an email spirosbond hotmail. The calibration bytes are not shown correctly, I have only checked with m and m8. The values were compared with the value from jtagICE and avrdude. Potentially a nice program but you could do away with a lot of keyclicks which are not necesserry. So instead of the current hotspot sensing and dialog, which requires two clicks in addition to the write click, why not have a tick box in setup, where you select if you want auto-reloading and have a splash screen, which tells you it is reloading for a second or so and then all you have to do is one click for the write.

When the writing is done, close dialog when the application loses mouse focus. No close click required!. About one in four attempts to write, it says that the wrong chip is detected. What is the point of asking whether to write or not?

I would rather have it detect it correctly before writing. Just have an abort option. At present this requires two clicks. You could reduce the size of the grids a little, to fit more data in the window.

Thanks for the careful observation and the time you spent sending your feedback. I will note down the suggestion and work to implement then in future. I have a great desire to help with the Russian localization of the interface. How can you help with this? Rather than write to ask for help, I just want to say thanks for making this brilliant software available to the hobbyist. Pingback: AVR-Wecker. But when I click read all, it gives me… No supported programmer found.

What should I do? I run it as root. But still I get the message, No supported programmer found. As you hav released V1. Because, most hardware crazy people love linux!!! I only need to know in which programming language you have design a great application for AVR usb programmer. No need to install 32bit-libraries. Download latest version of software.

No 64bit-version there, no source code. What is other software programmer to use for successful programming mega? Any solutions for this…….? Thnx in advance.

I programmed a today using the chip setting but I would like to get full memory support for , will this come soon in a new version? Thanks but does this not defeat the purpose of eXtreme Burner, I will now have to go off and find all the info about the new chip to make sure all the parameters are exactly correct.

Okay I think I found the info, can someone tell me if this is correct for the chip used in the Hobby King quad board? Okay this does not work, it does not add the chip, should I just mod the setting with the new memory details? Avinash i like to learn about programming of CAN module of pic will u please help me by giving a small tutorial introduction to programming CAN? Had problems burning Tiny13a until I changed xml file to change page size param from 64 to 32, than all worked well.

Thanks for a great product. How does one load eeprom data? To load. You must me using Open from the toolbar. Hi, Installed from your downloaded exe.

I have Win 7 32 bit. Please John. Is the calibration byte for the RC oscillator working? When I write and then read back, I get different data back write box is ticked. Less confirmation clicks on the next rev pls.

How can I run this on bit linux? Any time I want to program or erase a chip the following error appears: Power on failed! I have tried different AVRs, like mega32 and mega8, but there is the same error!!! What is wrong??? If i program the mega fuses with another programmer to more than 1MHz, than and only than it ist possible to communicate with eXtreme-Burner. It seems to be a problem with the clockspeed of eXtreme Burner, but there is no settings in eXtreme Burner as in Kazhama?

Or is it possible to set the clockspeed? Please help me and thank you for your help, Roman. Otherwise, eXtreme Burner has no problem in itself regarding this. Thanks for your great programmer. Thank you! Thanks, That problem solved. I now find I am unable to edit the cards file to add support for ATmega p. I am unable to unlock the directory and or the file in order to save the edited copy. Not a problem with your excellent software, I know but if you have any suggestions then I would be grateful.

Pingback: Using Atmel Studio 6 « maxEmbedded. Hello GUI is excellent, but it would be possible to add a function to autoimport? Then watch the changes in the specified hex file and if it changes, then burn it?

Hi, Solved edit of cards file. If i program the mega fuses with another programmer to 1MHz, than and only than it ist possible to communicate with eXtreme-Burner. It seems to be a problem with the clockspeed of eXtreme Burner, but there is no settings in eXtreme Burner?

Please help me and thank you for your help, Inder. Aborted core dumped. Seria bueno que este software tenga la opcion de configurar la frecuencia de programacion bit clock. Espero puedan hacerlo en su siguiente actualizacion.

Seria bueno que este software tenga la opcion de configurar la frecuencia de programacion bit clock.. Espero puedan hacerlo en su siguiente actualizacion.. First time using extrim burner v1. Is the supported? I am using version 1. Bob Mutton, Sydney, Australia. Hi, I apologise up front for asking dumb questions, that may have been asked earlier, or may have been subject of an earlier post.

As I mentioned in my recent post, I have been using this excellent software for some time, with great results. I have upgraded to version 1. I have two questions: 1. Is there a tutorial or an earlier post which describes how to add new chip types to the burner software? I assume this is done via the HTML file in extreme burner program file? How is this done? Thanks Alison. I now believe I have the ability to add new chips to Extreme Burner.

By the way I found the clock settings under the fuse bits tab. Regards Bob, Sydney, Australia. Hello Sir, I have been using extreme burner for a long time now without any problems! Do you have any suggestion to this problem?? Thank you very much in advance!! Is it possible to fix it, please??? I am using a windows 8 os.

And when i run program an getting an error report like — libusb0. Pingback: Network cable disconnect using relays and a microcontroller Bugariu Catalin Laboratory. I have updated the xml file to fix the ATtiny13, and added the ATtiny Let me know where I can send you a copy to include in the next version of XB!

I then converted that RPM file to debian package and installed the library…. Did I miss something??? Whats in those libraries?

Please help……I need this to work…. HI, there has been already please version with possible programming Atmega? It is a good one to try. Pingback: mcutips. Hi, Thank you for given information, it is very fine for me to burn the chip. Those work for me using usbasp programmer on Arduino Uno board. I am attaching the circuit and the. Hey, OK, no confirmation, I hence better stick with avrdude. I looked through the things, and found also the two threads in this forum, but they gave no unambigious confirmation.

So, please allow me to ask explicitely, if I would add this to the chips. It would be great if you publish it as free I mean license it as free software , you will surely get a lot of help to make this software better than it is, and the work will always be mainly yours. There are several fuse calculators on the web. Avrdude works good for me. I use 1. The programmer works very well, and is one of the easiest to use that I have come across.

There is one problem that I cannot overcome. Maybe I am doing something wrong? My apologies, I see this question was already answered last year. Hello Avinash! Now time for me to help others.

XML just add. In Fuselayout. Finally in Fuse and Lock bit settings…. Hi man! I have problem! Hex file NOT found. Cannot open Hex file. I get an error message, when i want to load a hex file. Cought same error on Windows 10 bit. Searched Internet for a fix and no result.

So… It seems author stopped to support his creation :. Thank you for creating Extreme Burner for Linux. I am Linux user from Indonesia. My friends Windows users in here are very happy to user Extreme Burner. It is just fantastic on Win 7, so easy to use! Unfortunately, it is incompatible with Windows 8, or so Windows 8 troubleshooter tells me.

When I try to run it, it tells me the libusb0. Anyway, can still use it on my old Win 7 computer, I suppose. Thanks for the great software.

When you get a Win 8 version running, I will make a contribution. Thank you for your software. I am using it. I found one bug. Could you correct this? After installing, it gives an error message saying..

Pingback: Using Atmel Studio 6 – maxEmbedded. Does any of the versions of this program posted can program a Atmel P chip. I notice the Atmel P is listed in the chip menu but no Atmel P. Is it possible to create a ARM version, compatible with Linaro? I want to use it with raspberryPi or some TV Stick?

They usually run off an atmega8 chip and the only way to update it though is to have another one and you just daisy chain them together with the 10 pin cable.. Sorry thats not very helpful in your case.

You can get a good usbasp on ebay for 3 or 4 bucks. Buy two if you can. It always pays to have two! Great software! I find it very useful. However, I have one suggestion. I currently program my atmega8u2 chip by substitutiing Atmega as it has similar specs. A solution to the problem? That way you can continually update the chip list without someone having to wait for a brand new release.

This is a great program just which I could get it to work on my new computer anyone have any ideas. Try the following link to the pdf file on information on how to update and fix the problem!

Hope this helps. I have installed last version on my pc. Pingback: [?????? Dear Avnish, Undoubtedly extreme burner is a very useful tool and also there is a linux version thats wonderful. Hi Avinash. There is a problem: can read but cannot save read the file. Can I change something or configure? At first, I got an error related to libusb that I knew I already installed because another software required it. This libusb error was solved when I installed the 32 bits version.

Cubytus Pls use libusb. I had to do it for my 64 BIT Win 8. Guys at github or avrfreaks may have a solution!. Give it a try. I have this zipped file. PM me kssoin icloud. Dear Avinash, I avidly follow your tutorials and your good work. I wanted to know if it can be used with avrdude with the command line instructions?

Does it have room for firmware upgrade once you develop it to work on Windows 8 and up. Dear Avinish when i connect usb avr pc identifi it says, new hard ware found. How do you link the library? I have the same problem running in ubuntu in w7 runs fine. Avinash solved this problem? This version does support such chip — is it possible to update the CHIP section of the program?

Dear Avinash, I became adventurous, and shot my foot. The programmer does not work. Can you provide the hex file so that I can get the programmer working? It is working. There is one issue that you can check at your end. When this is connected to the AVR Development board for Atmega 32A The command avrdude -c usbasp -pm32 -v gives the correct response just once.

If the command is given second time it gives an error that the device has failed to initialise … pls check connection … If the usb programmer is unplugged and re plugged then the command again works but for one time only. Well I have found solution for the problem mentioned above. Now there is no need to specify the SCK by way of -B switch and the usbasp need not be unplugged and replugged to function without any glitch.

I upgraded the hex on the Atmega8. Any body needing it may respond. The Programmer works very fine!! However, if you make a mistake with your fuses, then you may end up locked out of your chip.

The only solution is to get a high voltage programmer. The TLCS. However, USBasp to the rescue and it works when I put the tqfp adapter into a breadboard and use this software. The best AVR programmer that I had ever used. Thx a lot. If you look at the chips. The atmel datasheet for your particular chip contains all the information required.

You just have to search for it down near the bottom. Pingback: Bungle. Hai avinash. Pingback: [?? Imax B6 – itfm.

Thanks for reporting! But it will take some time for me to check about this problem.! Is OK. Can use 1. Can be my problem because of v1. I managed to put ATmega and p in chips. Please send me an email, so I can send my settings, if you are interested to include them in future versions … I use v. I think no… this is latest version… But developer can tell us more.

Hi, i am very much interested in your program , trying to leave MS-Windows aside , but when i run it under Linux-Mint , i have an error message:. As I am new to this process, can some help me with this? Should I choose another similar chip from the list?

I really like your eXtreme Burner. Neat program and impossible to get lost in a zillion features. Please note that their is NO need to install device driver separately, the installer will do everything.

Windows may ask for confirmation for running the setup, if it asks selected Run. We have already did that, so we can click OK. The next screen will ask you where you wish to install the software. In the next step you can select whether you want to create desktop icon or not. It is suggested that you create the icon so it is easy for you to launch it from the Windows desktop. Now setup has all inputs required to install the software and drivers, so just click next. After successful installation, the wizard will ask you whether you want to launch the newly installed software.

You have logged into Windows using a user who has administrative rights.

 

USING EXtreme Burner for AVR Microcontroller Programming : 8 Steps – Instructables

 

Sometimes it irritates me a lots because of its command line interface. Also the avrdude-gui is not much helpful as it was just calling the avrdude in background. I made many changes to the software to make it more useful but Finally I decided to write a fresh new software from scratch and eXtreme Burner — AVR was born!

For example a cheap RC Oscillator or a perfect high speed crystal oscillator. You can select from the following clock sources easily using a drop down menu. Finally the much awaited Linux Port is here! We would be very thankful to you.

These OS does not allow installation of unsigned drivers. Please see the following video on how to disable this. Only after disabling this feature install the software. This is first public release so please send your suggestions and bug reports. Peoples interested in translating the app may get more information on this page.

Facing problem with your embedded, electronics or robotics project? We are here to help! Post a help request. Avinash Gupta is solely focused on free and high quality tutorial to make learning embedded system fun!

More Posts – Website. Follow Me:. Hi Avinash! It is very use ful for me thanks regards s. Best regards, Ian. Mostly waiting for the linux version.!!! Hi Avinash, Thank you for this really nice and good software. He did not have success with Vista in his notebook. Is there a way to install it under Vista?

Something like a special driver? Best Regards, Ailson. Also one of my customer will it check under Vista. We will do something to run it under Vista. Very nice SWm and working very good. One question: It is a little bit to slow.

How can I make it faster. Hi, is it possible to pass hex file through command line? I saw that eXtreme Burner automatically recognizes mcu type and if file could be opened with command line option it would be great. An even better feature would be a way to list the differences often marked by an internal date stamp.

That said, V1. Thanks again for a major advance in AVR programming! I will surly apply the improvements that you have suggested. As this was the very first version so it was not that advanced.

Or suitable firmware and hardware for Extream-burner software. Thanks in advance. Great job on the program. Does it verify the entire memory or just the written one? Hi Kunal, If the Mega8 is not fried, one relatively easy way to recover it is to build a Dontronics DT parallel port SPI programmer very easy to build, even in a protoboard, with just a couple or Ohms resistors and a cap.

As you have messed up with the fuses, it is very important that you use an external clock source tied to XTAL1 pin. You can nake one with a timer. Setup as the programmer DT Setup carefully the fuse bits to fit your needs. Hope I have helped, and good luck Ailson. I can test it for you. Also I would love to see it go open source. I m using ur gui software for burning my avrs… n its being wrking gr8! Based on libusb-windevice-bin Thanks for good project.

Please read my feedback. Slow reading maybe it seems so for me only? I will implement the following in next release. Much more faster! I thank that normal position is connected and simply soldered it to ground. It appears with all software programmers. Very thanks and respect! Sifun, AVR beginner. I think this timeout 5sec caused by autodetection process. How to disable it….

In windows vista you cant write the calibration fuses and maybe its a tip to make da delay between writing and verifying cause my m16 gives errors with full sck but with slow sck is works perfect.

Looks very nice. Will try it out as soon as my programmer arrives. Fuse settings are a bit sparse… could have a drop down table as per AVR Studio.

Very good software! Will you develop multilingual version? If so, then I can help with the translation program for Russian and Ukrainian languages. Many thanks for your Offer to help!! Yes I have plans for multilingual version. I will contact you soon for translation help. I relied on the two 68 Ohms resistors to protect the USB lines, dropping the microcontroller port voltage from 5V to around 3. Once I included them, Vista immediately recognized the driver and eXtreme Burner worked beautifully.

Regards, Ailson. Extreme Burner is a great alternative for avrdude gui. Many thanks for You Avinash. I have only one suggestion: it could be a little bit faster for coding I use AVR Studio , now the time of writing the flash is 1 minute…. Stoping verification would be a bad move…Do you really not have a few seconds to spare in your life to wait for the messages?

I fine great your software…. If you want I can help to translate your software to spanish language South America need something like this!! I have made one exactly as you describe and it works perfectly. Mismatch at location 0x, task failed. This problem is very reproducable: ive tried this with several attinies, all of them fail this way.

Have anyone had the same problem? Is this a connection problem, a problem with the programmer, or the extremeburner? Hi it is great but when i use it for ATMEGA and the program was very large the software failed to load the hex file. Martin, Avinash Here, I thank you a lot for helping Vikram for his pointless question. But I have to delete these comments as they are not relavant to the page. Hi again, Ive tested it on an Atmega8 and it works flawless. I think my problem with partial writing of the hex code on attiny13s is because i use attiny13 and the program only supports attiny13A.

Tiny 13A should work ok…. They both have the same signature bytes… 1E 90 Thank you. Will expansion of the list of the list of the supported microcircuits? I detailed this information here for your knowledge so you can safely include in the next release , and for all users. All the needed information can be found in the respective datasheet.

 
 


Leave a Reply

Your email address will not be published. Required fields are marked *

en_USEN